Showing 1–12 of 116 results

Thorinox – One Compartment Sink

$592.00
This is a Thorinox stainless steel one compartment sink. With it, you can choose to have no drainboards, have a drainboard on either the right or the left, or have a drainboard on both sides. Two models can also be ordered with a centre drain.
      • 18 gauge 304 stainless steel
      • Stainless steel legs, braces, and bullet feet
      • Faucet hole at 8" from centre
      • 8" faucet width
      • 6.5" backsplash with 45 degree return
      • NSF approved

EFI – One Compartment Sink

$492.00
With this EFI stainless steel commercial sink, you've got the choice between having no drain boards, having a drain board on either side, or having a drainboard on both sides.
      • 18 gauge 304 stainless steel
      • All sinks come with 8" centre pre-cut holes for standard wall mount faucets
      • Has corner drains or centre drains

        COMPARTMENT SIZES

        The options for the different compartment sizes work like this: The first dimension is from left to right (width), the second dimension is from front to back (depth), and the third dimension is from top to bottom (height). So for example, a 18" x 21" x 14" compartment would be 18" wide, 21" deep, and 14" high.

        WARRANTY

        All EFI products are warranted against manufacturing defects for a period of one year from the date of your original purchase date. EFI Sales Ltd may repair or replace defective units at its discretion.

Omcan – One Compartment Sink

$482.00
With this EFI stainless steel commercial sink, you've got the choice between having no drain boards, having a drain board on either side, or having a drainboard on both sides.
      • 18 gauge 304 stainless steel
      • All sinks come with 8" centre pre-cut holes for standard wall mount faucets
      • Has corner drains or centre drains

SPECS

COMPARTMENT SIZES

The options for the different compartment sizes work like this: The first dimension is from left to right (width), the second dimension is from front to back (depth), and the third dimension is from top to bottom (height). So for example, a 18" x 21" x 14" compartment would be 18" wide, 21" deep, and 14" high.

 

WARRANTY

All EFI products are warranted against manufacturing defects for a period of one year from the date of your original purchase date. EFI Sales Ltd may repair or replace defective units at its discretion.

(Clearance) GEL-BV-250 PM US – Twin Twist Soft Serve Machine – 34 Litre Ouptut – Never Used

$25,995.00

This item is overstock. It is new; it has never been used and comes with a its full manufacturer warranty. We have only one available. This deal will not last forever!

The Gelmatic BV 250 PM is a floor model twin twist soft serve machine, which means it can dispense two flavours seperately, or together as a twist. It has a pump feed and 34 litre output, which works out to 33 kilograms of ice cream per hour. It dispenses gelato, yogurt, and soft serve ice cream. The overall dimensions (WDH) are 20.87" x 30.57" 57.95". It's motor is 100% made in Italy to guarantee high performance. This isn't just any softserve machine. It features an interactive touch screen control system that lets you program, monitor, and troubleshoot any function on this machine. You can even do it remotely. This is a very user-friendly machine, and Gel Matic is a top quality brand.
      • Limited time offer
      • Overall dimensions (WDH) 20.87" x 30.57" x 57.95"
      • Pump feed
      • State-of-the-art touch screen controls
      • 34 litre output (33 kilograms of ice cream per hour)
      • Dispenses gelato, yogurt, and soft serve
      • Motor 100% made in Italy

SPECS

Model GEL-BV-250 PM US Brand Gelmatic Dimensions (WDH) 20.87" x 30.57" x 57.95" Output 34 litres per hour (33 kilograms of ice cream)

(Clearance) Garland Table Top Flat Slim Hob – Commercial Induction Cooker – 208v, 1 phase – Never Used

$1,695.00

This item is overstock. It is new; it has never been used and comes with a its full manufacturer warranty. We have only one available. This deal will not last forever!

The Garland Table Top Flat Slim Hob, otherwise known as the SHBA2500 is a tabletop induction burner. The dimensions (WDH) are 15” x 17.3” x 5.5” and it’s 208 volts, 1 phase. It has easy-to-use controls: a single rotary switch numbered 1 to 12, and it has a stainless steel body fit to withstand a commercial environment. Induction cooking uses electromagnetism to heat food. Heat is generated when an induction-compatible pot or pan is placed on the hot top; only the cookware gets hot, not the burner. If you were to simply remove the cookware from the burner, it would be cool, which means less effort during clean-up if you happened to have a few spills. As a means of preventing energy waste and efficient cooking, induction is taking the foodservice industry by storm.
      • Limited time offer
      • Model SHBA2500
      • Induction
      • Dimensions (WDH) 15” x 17.3” x 5.5”
      • 208v, 1 phase
      • Stainless steel body

SPECS

Model SHBA2500 Brand Garland Dimensions (WDH) 15” x 17.3” x 5.5” Electrical 208v / 60Hz / 1 phase

KEZA007H8-IS2C EZ-LINE SCROLL – Air Condensing Unit (Clearance)

$3,995.00

This item is overstock. It is new; it has never been used and comes with our 90-day peace-of-mind warranty. We have only two available. This deal will not last forever!

This is a KeepRite air condensing unit for walk-in refrigerators. It's rated for a box temperature of 7.77° Celsius. We have two. Please see below for features, as there is a slight difference in BTUH: KEZA007H8-IS2C EZ-LINE Scroll Condensing Unit - Air Evap. TD: 10.4 ºF Line Loss: 0.5 ºF System Load : 8888 BTUH Refrigerant: R404A Suction Temp : 35.1 ºF Ambient Temp : 90 ºF Voltage: 208-230/1/60 1 OPTION DISCONNECT SWITCH, NON-FUSED 1 OPTION LIQUID LINE FILTER + SIGHT GLASS, SEALED 1 OPTION OVERSIZED RECEIVER 1 OPTION SUCTION ACCUMULATOR, WITHOUT HEAT EXCHANGER 1 OPTION SUCTION FILTER, SEALED TYPE KEZA007H8-IS2C EZ-LINE Scroll Condensing Unit - Air Evap. TD: 10.4 ºF Line Loss: 0.5 ºF System Load : 9175 BTUH Refrigerant: R404A Suction Temp : 35.1 ºF Ambient Temp : 90 ºF Voltage: 208-230/1/60 1 OPTION DISCONNECT SWITCH, NON-FUSED 1 OPTION LIQUID LINE FILTER + SIGHT GLASS, SEALED 1 OPTION OVERSIZED RECEIVER 1 OPTION SUCTION ACCUMULATOR, WITHOUT HEAT EXCHANGER 1 OPTION SUCTION FILTER, SEALED TYPE

90 DAY WARRANTY

Once you receive this machine, it will be covered by our 90 day, peace-of-mind warranty; because every machine that leaves our hands is a machine that we stand behind.

Cambro PR314151 – 19.75″ x 19.75″ Full Size Dishwasher Peg Rack

$40.90

Features

      • Full size (19.75" x 19.75") Camrack peg rack
      • NSF Listed
      • Safe for use in high heat dishwashers up to 200° F (93.3° C)
      • Open grating inside for water circulation and fast drying
      • Closed outer walls keep out contaminates and fingers
      • Stacks with like-size Camracks for easy storage and washing
      • Smooth top rim of each rack ensures smooth and safe stacking
      • Molded-in ergonomic handles for safe, comfortable carrying
 

Specs

Brand Cambro Model PR314151 Type Peg rag Dimensions (WDH) 19.75" x 19.75" x 4" Size Full Size Colour Grey

Omcan 37387 – Grey Plastic Dishwasher Rack for Flatware

$25.14
The Omcan 37387 is a grey, plastic dishwashing rack. This dishwashing rack is designed specifically for flatware (hence the fine plastic weave on the bottom). The dimensions (WDH) are 19" x 19" x 4". About 95% of commercial dishwashers available on the market take a standard 20" x 20" rack. On occasion, you might find some specialty dishwasher that will require specialty racks to be ordered with it, but for the most part, all of the dishwasher racks we sell will fit in any commercial dishwasher, be it a door-type, conveyor, etc. Furthermore, dishwashing racks are designed for specific purposes. So whether or not you want to wash pots and pans, glass and stemware, flatware, etc., there's a dishwashing rack made specifically for that purpose.
      • Made of grey plastic
      • Designed for washing flatware
      • Dimensions (WDH) 19" x 19" x 4"

SPECS

Model 37387 Brand Omcan Dimensions (WDH) 19" x 19" x 4"

Omcan 33871 – Grey Plastic Dishwasher Rack for Plates

$41.17
The Omcan 33871 is a grey, plastic dishwashing rack. This dishwashing rack is designed for washing plates. The dimensions (WDH) are 19" x 19" x 4". A lot of commercial dishwashers -- for example, conveyor dishwashers -- process dishwashing racks. Dishwashing racks are specific to what is is you want to wash. Whether it be flatware, plates and dishes, pots and pans, or stemware, there's a dishwashing rack for it.
      • Made of grey plastic
      • Designed for washing general wares
      • Dimensions (WDH) 19" x 19" x 4"

SPECS

Model 33871 Brand Omcan Dimensions (WDH) 19" x 19" x 4"

Oneida GFCR-189 – Fryer Filter Holder

$8.75
The Oneida GFCR-189 is a cone shaped fryer filter holder. It's made of chrome-plated steel. The dimensions are 18" x 9.5". Fryer filters are an integral part of the frying process, because the quality of your oil will directly impact the flavour of your food. As you fry your food, sediment will be left behind, which can not only change the flavour but change the temperature of your oil. The fryer filter holder is meant to fit over a stockpot that you would place under your fryer. Simply open the drainage valve, and the oil will drain through the filter and into the stockpot. Any sediment will be caught in the filter, and the leftover oil is fit to be reused!
      • An integral part of the manual filtering process
      • Cone-shaped
      • Constructed of chrome-plated steel
      • 18" x 9.5"
      • Meant to fit over a stockpot placed under a fryer

SPECS

Model GFCR-189 Brand Oneida Dimensions 18" x 9.5"

Nickel-Plated Iron Fryer Basket with Coloured Handles & Front Hook

$35.74

Features

 
      • Nickel-plated iron fryer basket
      • Available in 6 colours and sizes
      • Has a front hook to hang above the oil
      • Handle coated in heat-resistant plastic
      • Great for regular use and cooking a variety of fried foods
 

Specs

  Brand Omcan
Model Colour Dimensions (WDH)
80553 Black 11" x 5.6" x 4.1"
80554 Orange 12.1" x 6.3" x 5.3"
80556 Red 12.9" x 6.5" x 5.4"
11366 Blue 13.25" x 5.9" x 5.6"
11367 Green 13.25" x 6.5" x 5.9"
80555 Yellow 16.75" x 8.75" x 6"

Perfect Fry 2FK001 – Filter Kit for Fryers

$250.00

Features

      • Works with the PFC570, PFA570, and PFA720
      • Includes one carbon and one metal filter
      • Ships from Canada
      • Lasts 2 to 3 months
      • Reduces odours
 

Specs

Brand Perfect Fry Model 2FK001 Type Filter Kit